eB34TD1T-SN

The eB34TD1T-SN is an electrical emSFP transmitter module designed to convert SDI to an HDMI signal output without scaling artifacts. The video sfp eB34TD1T-SN is an 3G/HD/SD SDI to HDMI1.4 and DVI1.0 video sfp (emSFP) converter. This video SFP is designed to convert 3G/HD/SD SDI to HDMI 1.4 signal without scaling artifacts. Up to 8 channels of 3G/HD/SD-SDI audio channels are re- embedded in the HDMI stream. SMPTe 424M, 292M and 259M compliant SDI Reclocked Loopback to host connector Supported format: 525/625, 720p/1080i (50/59.94/60Hz), 1080p (23.98/24/15/29.97/30/50/59.94/60Hz) HDMI/DVI Output: 24 bit (3x8 bits) RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4 RGB Range (Full/SMPTe) Up to 2 channel audio embedding (PCM) HDMI 1.4 Type D connector HDMI Type D plug with retention Control via serial interface includes: Voltage & Temperature Monitoring HDMI/DVI interface configuration eDID reading, Audio mapping Module Information Low Power Consumption - Single Supply +3.3V 58.5mm x 13.4mm x 8.6mm SFP Package Operating temperature: -20°C to 80°C Delay: 4-20 pixels depending on rate and required conversion High-density and future-proof architecture Pathological signal support Superior jitter management and signal regeneration Monitoring and diagnostics at the edge of your product via serial communication Superior link budget performance compares to the ST-297 specification Highest optical performance (fiber stub) and lowest defect rate in the market