eP9461e is a 6GHz HDMI 2.0 4-IN 1-OUT Switcher with integrated equalizer and Jitter Clean Circuit. The chip uses Re-Sample and Re-Drive architecture which re-samples data at the receiver side and re-drive data at the transmitter side. This architecture will not pass through noise from inputs to output and hence provides reliable transmission. Besides, the Jitter Clean Circuit provides the jitter-free output for extending the Cable Length. The chip also supports 4 ports of on-chip eDID RAM and programmable passive/active DDC switches to lower down system cost.

The chip is also integrated with an e-Flash MCU to make user’s applications very easy.

 

•Supports 4 HDMI input ports with integrated equalizer

•Supports 1 HDMI output port with Jitter Clean Function

•Compliant to HDMI 1.4 and HDMI 2.0 specification

•Support wide Frequency Range: 25MHz - 600 MHz (VGA/480p - 4K2K60)

•Support 4 ports on-chip eDID RAM

•Support on-chip programmable passive/active DDC switches

•Register-programmable via slave IIC interface

•On chip e-Flash MCU

•Low stand-by current at power down mode

•128-pin LQFP (e-PAD) package